? semiconductor components industries, llc, 2015 august, 2015 ? rev. 2 1 publication order number: ESD5101/d ESD5101, esd5111 esd protection diodes micro?packaged diodes for esd protection the esd51x1 series is designed to protect voltage sensitive components from esd. excellent clamping capability, low leakage, and fast response time provide best in class protection on designs that are exposed to esd. because of its small size, it is suited for use in smartphone, smart-watch, or many other portable / wearable applications where board space comes at a premium. features ? low capacitance (5 pf max, i/o to gnd) ? small body outline dimensions ? 01005 size: 0.435 x 0.23 mm ? 0201 size: 0.6 x 0.3 mm ? protection for the following iec standards: iec 61000?4?2 (level 4) ? low esd clamping voltage ? these devices are pb?free, halogen free/bfr free and are rohs compliant maximum ratings (t j = 25 c unless otherwise noted) rating symbol value unit operating junction temperature range t j ?55 to +125 c storage temperature range t stg ?55 to +150 c lead solder temperature ? maximum (10 seconds) t l 260 c iec 61000?4?2 contact (esd) iec 61000?4?2 air (esd) esd esd 15 15 kv kv stresses exceeding those listed in the maximum ratings table may damage the device. if any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. see application note and8308/d for further description of survivability specs. this document contains information on some products that are still under development. on semiconductor reserves the right to change or discontinue these products without notice. marking diagrams esd5111 (0201) wlcsp2 case 567av pin configuration and schematic www. onsemi.com l, e, x = device code m = date code 12 e m ESD5101 (01005) dsn2 case 152ak = l see detailed ordering and shipping information on page 2 o f this data sheet. ordering information ESD5101p (01005) dsn2 case tbd* x esd5111p (0201) wlcsp2 case tbd* x m * in development
ESD5101, esd5111 www. onsemi.com 2 electrical characteristics (t a = 25 c unless otherwise specified) parameter symbol conditions min typ max unit reverse working voltage v rwm i/o pin to gnd 3.3 v breakdown voltage v br i t = 1 ma, i/o pin to gnd 3.68 5.0 6.5 v reverse leakage current i r v rwm = 3.3 v, i/o pin to gnd 0.1 a ESD5101, esd5111 clamping voltage tlp (note 1) v c i pp = 8 a iec 61000?4?2 level 2 equivalent ( 4 kv contact, 4 kv air) 5.5 v i pp = 16 a iec 61000?4?2 level 2 equivalent ( 8 kv contact, 15 kv air) 6.5 junction capacitance c j v r = 0 v, f = 1 mhz 5.5 pf product parametric performance is indicated in the electrical characteristics for the listed test conditions, unless otherwise noted. product performance may not be indicated by the electrical characteristics if operated under different conditions. 1. ansi/esd stm5.5.1 ? electrostatic discharge sensitivity testing using transmission line pulse (tlp) model. tlp conditions: z 0 = 50 , t p = 100 ns, t r = 4 ns, averaging window; t 1 = 30 ns to t 2 = 60 ns. ordering information device package shipping ? ESD5101fct5g dsn2 (pb?free) 10,000 / tape & reel esd5111fct5g wlcsp2 (pb?free) 10,000 / tape & reel ESD5101pfct5g** side wall isolated 01005 10,000 / tape & reel esd5111pfct5g** side wall isolated 0201 10,000 / tape & reel ** in development. contact local sales rep for availability. ?for information on tape and reel specifications, including part orientation and tape sizes, please refer to our tape and reel packaging specifications brochure, brd8011/d.
ESD5101, esd5111 www. onsemi.com 3 typical characteristics figure 1. ESD5101 cv characteristics figure 2. esd5111 cv characteristics v bias (v) v bias (v) 2.5 1.5 3.5 0.5 ?0.5 ?1.5 ?2.5 ?3.5 0 1 2 3 4 5 6 10 figure 3. ESD5101 s21 insertion loss figure 4. esd5111 s21 insertion loss frequency (hz) frequency (hz) 1.e+07 ?10 ?8 ?4 ?2 0 2 figure 5. ESD5101 capacitance over frequency figure 6. esd5111 capacitance over frequency frequency (ghz) frequency (ghz) 2.5 1.5 1.0 0.5 0 1 3 4 5 7 8 10 c (pf) (db) capacitance (pf) 7 8 9 ?6 2 6 9 2.0 3.0 1.e+08 1.e+09 2.5 1.5 3.5 0.5 ?0.5 ?1.5 ?2.5 ?3.5 0 1 2 3 4 5 6 10 1.e+07 ?10 ?8 ?4 ?2 0 2 2.5 1.5 1.0 0.5 0 1 3 4 5 7 8 10 c (pf) (db) capacitance (pf) 7 8 9 ?6 2 6 9 2.0 3.0 1.e+08 1.e+09
ESD5101, esd5111 www. onsemi.com 4 typical characteristics figure 7. ESD5101 positive tlp i?v curve figure 8. esd5111 positive tlp i?v curve v c , voltage (v) 20 18 14 12 8 4 2 0 0 2 6 8 10 14 18 20 figure 9. ESD5101 negative tlp i?v curve figure 10. esd5111 negative tlp i?v curve tlp current (a) 4 12 16 610 16 0 2 10 4 6 8 v iec , equivalent (kv) v c , voltage (v) 0 2 6 8 10 14 18 20 tlp current (a) 4 12 16 0 2 10 4 6 8 v iec , equivalent (kv) v c , voltage (v) 20 18 14 12 8 4 2 0 0 ?2 ?6 ?8 ?10 ?14 ?18 ?20 tlp current (a) ?4 ?12 ?16 610 16 0 2 10 4 6 8 v iec , equivalent (kv) v c , voltage (v) 0 ?2 ?6 ?8 ?10 ?14 ?18 ?20 tlp current (a) ?4 ?12 ?16 0 2 4 6 8 v iec , equivalent (kv) 10 20 18 14 12 8 4 2 0 6 10 16 20 18 14 12 8 4 2 0 6 10 16 figure 11. esd5111 positive 8 kv esd contact discharge figure 12. esd5111 negative 8 kv esd contact discharge
ESD5101, esd5111 www. onsemi.com 5 iec 61000?4?2 spec. level test volt- age (kv) first peak current (a) current at 30 ns (a) current at 60 ns (a) 1 2 7.5 4 2 2 4 15 8 4 3 6 22.5 12 6 4 8 30 16 8 i peak 90% 10% iec61000?4?2 w aveform 100% i @ 30 ns i @ 60 ns t p = 0.7 ns to 1 ns figure 13. iec61000?4?2 spec transmission line pulse (tlp) measurement transmission line pulse (tlp) provides current versus voltage (i?v) curves in which each data point is obtained from a 100 ns long rectangular pulse from a charged transmission line. a simplified schematic of a typical tlp system is shown in figure 14. tlp i?v curves of esd protection devices accurately demonstrate the product?s esd capability because the 10s of amps current levels and under 100 ns time scale match those of an esd event. this is illustrated in figure 15 where an 8 kv iec 61000?4?2 current waveform is compared with tlp current pulses at 8 a and 16 a. a tlp i?v curve shows the voltage at which the device turns on as well as how well the device clamps voltage over a range of current levels. figure 14. simplified schematic of a typical tlp system dut l s oscilloscope attenuator 10 m v c v m i m 50 coax cable 50 coax cable figure 15. comparison between 8 kv iec 61000?4?2 and 8 a and 16 a tlp waveforms
ESD5101, esd5111 www. onsemi.com 6 package dimensions ? esd5111 (0201) wlcsp2, 0.6x0.3 case 567av issue a notes: 1. dimensioning and tolerancing per asme y14.5m, 1994. 2. controlling dimension: millimeters. a b e d bottom view b 0.05 b a c 0.02 c top view 0.02 c a a1 0.02 c 0.02 c c seating plane side view dim min max millimeters a 0.25 0.30 a1 0.00 0.05 b 0.14 0.17 d 0.60 bsc e 0.30 bsc l 0.19 0.24 solder footprint* dimensions: millimeters 0.81 0.33 0.28 *for additional information on our pb?free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. recommended e 0.36 bsc 2x 2x 2x l 2x 2x e 2x package dimensions ? ESD5101 (01005) case 152ak issue a notes: 1. dimensioning and tolerancing per asme y14.5m, 1994. 2. controlling dimension: millimeters. a b e d bottom view b l 0.02 c top view a a1 c seating plane side view dim min max millimeters a 0.165 0.195 a1 ??? 0.030 b 0.177 0.193 d 0.435 bsc e 0.230 bsc solder footprint* dimensions: millimeters 0.44 0.23 *for additional information on our pb?free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. 1 l 0.112 0.128 0.16 recommended 1 pin 1 indicator e 0.270 bsc a m 0.05 b c a m 0.05 b c 2x e 2x 2x 0.02 c 2x 2x 0.02 c 0.05 c 2x 2x 2x
ESD5101, esd5111 www. onsemi.com 7 package dimensions ? ESD5101p (01005)
ESD5101, esd5111 www. onsemi.com 8 package dimensions ? esd5111p (0201) on semiconductor and the are registered trademarks of semiconductor components industries, llc (scillc) or its subsidia ries in the united states and/or other countries. scillc owns the rights to a number of pa tents, trademarks, copyrights, trade secret s, and other intellectual property. a listin g of scillc?s product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent?marking.pdf. scillc reserves the right to make changes without further notice to any product s herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any part icular purpose, nor does sci llc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ?typi cal? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. all operating param eters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the right s of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgic al implant into the body, or other applications intended to s upport or sustain life, or for any other application in which the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer s hall indemnify and hold scillc and its officers , employees, subsidiaries, affiliates, and dist ributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the design or manufac ture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner. p ublication ordering information n. american technical support : 800?282?9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81?3?5817?1050 ESD5101/d literature fulfillment : literature distribution center for on semiconductor 19521 e. 32nd pkwy, aurora, colorado 80011 usa phone : 303?675?2175 or 800?344?3860 toll free usa/canada fax : 303?675?2176 or 800?344?3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your loc al sales representative
|
